Wax in Styrene 5% Solution
5% Wax in Styrene solution for adding to your sanding coats when laminating. Available as a 125 ml can, 500 ml, 1 litre or 4 litres. All Seabase polyester resins require a 1% – 2 % addition of Wax in Styrene after lamination for Sand Coats (hot coats) to aid sanding and cure by inhibiting air…..
Description
5% Wax in Styrene solution for adding to your sanding coats when laminating. All Seabase Polyester Resins require a 1% – 2 % addition of Wax in Styrene after lamination to allow sanding and aids cure by preventing the resin remaining tacky. Available in 125 ml tins, and in 500 ml, 1 litre, and 5 litres. This solution is consistent. Can be forced back into solution easily when cold. Store in a warm place and keep sealed.