FCS Fusion Plugs
This is the FCS Fusion Plug – or box. The rail box has a 5° (degree) offset (grey surround) , or a 9° offset (orange surround) . The centre box has 0° degrees offset (obviously). Recommended for Epoxy/EPS systems, although its equally compatible with PU foam. Set with Resin Research Epoxy Resin 2000CE/2100F for best results. A full Thruster setup requires two rails and a centre plug. Seabase recommends and uses this FCS Fusion system for its universal application, strength and ease of use. More below…
Description
This is the FCS Fusion Plug – or box. The rail box has a 5° (degree) offset, or a 9° offset. The centre box has 0 degrees offset (obviously). Recommended for Epoxy/EPS systems, although its equally compatible with PU foam. Set with Resin Research Epoxy Resin 2100F for best results. A full Thruster setup requires two rails and a centre plug. Seabase recommends and uses this FCS Fusion system for its universal application, strength and ease of use.
FCS notes: Fusion was developed primarily for EPS/Epoxy surfboards; however the system can be just as easily applied to PU/Poly construction surfboards. Our goal in designing Fusion was to offer significant improvements and advantages over other pre-glass systems currently on the market. Fusion is claimed to be the strongest pre-glass system on the market.
- • Precision moulded polymer plug with high density foam insert
- • EPS/Epoxy and PU/Polyester compatible
- • Strongest and lightest pre-glass system on the market
- • Shorter footprint than other pre-glass systems
- • Does not compromise rocker and tail flex
- • Less base flex = increased performance
- • Minimises weight while maintaining the board’s natural balance
- • Elongated slots offer forward & aft movement
- • Shapers dots remain visible
- • Fits most bottom contours
We recommend using this little toy, a fin angle finder, to get the finest degree offset for your fins, allowing for concaves or v-bottoms and for performance accuracy.